The first thought that comes to your mind when you hear the sound of water dripping from a leaky tap is to….ignore it. Well, you are not alone!
That’s exactly what a lot of people do until the issue becomes too large to ignore. But, leaks shouldn’t be overlooked as they waste more water than you could possibly imagine.
Leaks in hot water systems Brisbane South should be fixed as soon as possible to avoid water waste -and avoid hefty power bills.
If you are ready to spare a bit of your time and effort, fixing a leaky tap isn’t a tremendous task. However, if it’s a major leak or a complex issue, calling a plumber Brisbane would be the best and most cost-effective solution.
In this article, we’ll walk you through a simple step-by-step guide on how to fix a leaky and annoying tap!
Taps/faucets have different mechanisms depending on the way they function. So, if you want to fix your tap effectively using the right tools, it’s paramount to identify its type first. Generally, taps can be categorised into 4 different types such as,
There are many causes for a leaky tap. While some can be fixed easily with a simple repair and a few tools, others would be too complex to handle on your own.
So, assessing the problem can help you determine if it’s a DIY-worthy quest if you should better call for a plumbing repair service near me.
If the leak is relatively new and involves worn-out components, you can replace it at home. But, prolonged leaks can corrode your valve seat, requiring the assistance of a professional plumber Brisbane. The same goes to repairs of hot water systems Brisbane South.
Simple fixes don’t need a lot of materials, but you need to be equipped with the essentials to perform the job well. Here is a list of things you need:
Once you are ready, the first step of the repair is to close the main water supply of the property.
Then, turn the tap on to let out excess water. Placing a bowl under it can prevent the parts from falling into the drain.
Depending on the tap, use a screwdriver or a spanner to remove the cover, knob, and/or the handle of the tap. The nut that holds these in place is usually found under the cap. If the nut that’s to be removed is too tight, use some lubricant.
Once the cover is removed, you would see the stem of the tap, o-ring, and the washer respectively. If water leaks from the handle, what needs to be replaced is the o-ring. If not, move to the next step.
The washer, which is made from rubber, is usually the main cause of tap leaks, and the source of many headaches when it comes to hot water installation Brisbane.
It becomes worn-out with regular use, and many times it just needs to be replaced. So if the washer is not in good condition, just change it! You would have to apply some lubricant to get it in place.
If the washer is still in good condition, the problem could be with the valve. In such a case, we recommend you to look for licensed plumbing contractors near me specialised in plumbing services Brisbane, as they will be able to provide the right solution.
Once you have replaced the parts, reassemble the tap and tighten the nuts using a screwdriver and spanner as required. Wipe off excel lubricant using the cloth piece. Viola, your leak is fixed!
Ideally, knowing a reputed plumber Brisbane with the expertise of fixing leaks, hot water system service, and blocked drains Brisbane comes handy as you can call them if anything comes up!