Global
Can you tile over Mouldy walls?

September 8, 2021

Mitchel Plumbing Gas

Can you tile over Mouldy walls?

Mouldy walls can be a real turn-off, but what do you do when you have to tile over them? Can you just slap some tiles on top and call it a day, or is there more to it than that?

In this blog post, we'll take a look at the options you have for dealing with mouldy walls – from tiling over them to removing the plaster and starting from scratch. We'll also discuss the pros and cons of each option so that you can make an informed decision about what's best for your situation.

What causes a mouldy wall is the humidity in the room. When you have a lot of humidity, and that condenses on a cold surface, it will form water droplets. It normally occurs in the bathroom because of the shower, and in kitchens because of cooking.

The water droplets will run down the wall, and if there’s no escape from the humidity, it will start to form mould.

Mould is a type of fungi, and it likes dark, humid places to grow. It’s also attracted to warmth, so if you have a radiator under a window, that’s often where you’ll see it.

Mould is not just unsightly, it can also be dangerous to your health. It can cause respiratory problems, skin irritation and even allergic reactions. In extreme cases, it can lead to serious illnesses such as pneumonia.

Is tiles good for damp walls?

It's a common myth that tiles are good for damp walls. However, this is not the case. Tiles can actually make the problem worse by trapping moisture against the wall, which can lead to mould and mildew. Mouldy and damp walls are not a good foundation for tile installation, so it's best to address the issue before you start tiling.

What happens if you tile on damp plaster?

Tiling over damp plaster is not recommended. The tiles will not adhere properly to the surface and will eventually come loose. The dampness can also cause the tiles to crack and break. If you must tile over damp plaster, make sure to use a waterproof adhesive and grout.

Do walls need plastering before tiling?

No, walls do not need to be plastered before tiling. However, it is recommended that you repair any cracks or holes in the wall before tiling. This will create a smooth surface for the tiles to adhere to and will help prevent them from cracking.

The type of plastering used in a bathroom is different from the type used in a kitchen. In a bathroom, you need to use waterproof plasterboard, which is designed to resist moisture. This will help prevent the tiles from coming loose and will also protect the wall from mould and mildew.

How do you prepare a plaster wall for tiling?

To prepare a plaster wall for tiling, start by repairing any cracks or holes in the surface. Then, sand the entire area to create a smooth, even surface. Next, apply a primer to the wall and let it dry completely. Once the primer is dry, you can begin tiling.

Can you grout over black Mould?

Grouting is a process that involves filling the spaces between tiles with a waterproof sealant. Black mould can develop in these spaces if they are not properly sealed. As such, it is not recommended that you grout over black mould. Instead, you should remove the mould and then grout the area.

There are a few ways to remove black mould from grout. One is to use a bleach solution. Mix one part bleach with three parts water and apply it to the affected area. Let it sit for a few minutes before scrubbing with a brush. You can also use a commercial mould remover. Just follow the instructions on the product label.

Once the mould has been removed, you can grout the area. Make sure to use waterproof grout so that mould does not have a chance to grow back.

Can you tile on damp concrete?

Tiling on damp concrete is not recommended. The tiles will not adhere properly to the surface and will eventually come loose. The dampness can also cause the tiles to crack and break. If you must tile over damp concrete, make sure to use a waterproof adhesive and grout.

How do you treat damp in internal walls?

Dampness in internal walls can be caused by a variety of factors, such as condensation, leaks, or poor ventilation. The best way to treat dampness is to identify and address the source of the problem.

If the dampness is caused by condensation, you can try to improve the ventilation in the room. This can be done by opening windows or installing a fan. If the dampness is caused by a leak, you will need to repair the leak and then dry out the area. If the dampness is caused by poor ventilation, you can try to improve the ventilation in the room. This can be done by opening windows or installing a fan.

In bathrooms, it is recommended to have air vents or extractor fans to remove the moisture-laden air. The use of a dehumidifier can also help to reduce the amount of moisture in the air.

The humid Australian climate doesn't help, so just opening the windows and doors won't be enough. You could try a dehumidifier to help remove the moisture from the air.

Once the source of the dampness has been addressed, you can begin to treat the affected area. This can be done by painting the walls with a damp-proof paint or by sealing the walls with a waterproof sealant.

Treating dampness in internal walls is important to prevent the growth of mould and mildew. These can cause serious health problems, so it is best to address the problem as soon as possible.

What if the damp wall is caused by leaking pipes?

If the damp wall is caused by leaking pipes, you will need to repair the leak and then dry out the area. Repairs should be done by a professional. So if you notice any damp patches on your walls, it's best to call a plumber to take a look. This is important as dampness can lead to the growth of mould and mildew, which can cause serious health problems.

In addition, a leaking pipe could damage the structural integrity of your home, so it's best to get it fixed as soon as possible.

Call Mitchell Plumbing and Gas in Brisbane on for all your plumbing needs, including repairs and maintenance.

Leaking pipes can cause a lot of damage to your home, so it's important to get them fixed as soon as possible. Mitchell Plumbing and Gas in Brisbane can help you with all your plumbing needs, including repairs and maintenance. Call us today on for a free quote.

Recent Post

How to Fix A Leaky Tap (Quickly!)

How to Fix A Leaky Tap (Quickly!)

September 20, 2021
Mitchel Plumbing Gas

The first thought that comes to your mind when you hear the sound of water dripping from a leaky tap is to….ignore it. Well, you are not alone!

Why is my floor wet in my house?

Why is my floor wet in my house?

October 5, 2022
Mitchel Plumbing Gas

Why is my floor wet? It's not the rain, it's not the snow - although those could be culprits too. No, it seems that my floor is just constantly wet for no

Plumbing services in newly built home

Plumbing services in newly built home

October 2, 2021
Mitchel Plumbing Gas

The easiest way to define plumbing is: it is any system that conveys fluids like water for homeowners' and commercial property users' benefit. Typically, plumbing uses valves, pipes, fixtures, tanks, and more